Home / Shop / Products / Bike Lights / PWR Trail

  • PWR Trail
  • PWR Trail
Knog - Drag to rotate Drag to rotate
PWR Trail

PWR Trail 1000l

AUD $184.99
(1 customer review)

This product in currently out of stock

Overview

PWR Trail is a modular bike light. But it’s not JUST another bike light. Not only is it a high powered bike light, but simply take the product apart and you have much more. A lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range.

2 in stock

Quantity

Battery Indicator

Battery Indicator Knog Knog

Hate it when you run out of battery with no warning? That’ll never happen with PWR Trail, with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged, 2 lights = half charged etc.

Easy to Mount & Use

Easy to Mount & Use Knog Knog

This light can be mounted on top or below your handlebars, directly under your Garmin, or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted, using PWR Trail is a breeze. It’s a simple twist-head operation to turn light on & off and to scroll through light modes.

Charge Your Devices

Charge Your Devices Knog Knog

Press the red button to release the lighthead, and use the PWR bank to charge your phone, GoPro, cycle computer or other device. 1 hour riding @1000 lumens means you can top up charge your iPhone by 75%. Charge your PWR Trail using the included micro USB cable, charge time is 3.5 hours.

Wide Beam & Customisable Modes

Wide Beam & Customisable Modes Knog Knog

PWR Trail outputs a max 1000 lumens, and can run for up to 300 hours on Eco Flash Mode. Its elliptical beam gives broader, bright road coverage. It comes with 6 pre-programmed modes, and you can program the light to suit your needs with Modemaker. You can control brightness, adjust runtimes and add new light modes.

Creating the PWR range didn’t happen overnight.

Creating the PWR range didn’t happen overnight.

5 designers, 7 engineers, 480 prototypes and 47 days of 3D printing.

  • Specifications
  • Instructions

Dimensions

H: 128mm x W: 35mm x L:35mm

Weight

230 grams

Lumens

1000

  • Modes Lumens Runtime
  • Max 1000 2
  • Mid 550 3
  • Stamina 80 21
  • Pulse 300 8
  • Strobe Flash 225 14
  • Eco Flash 15 300

Instructions

Watch the instructional video or download the user guide below.

PWR Trail Quick Start

Customer Reviews 5.00 Overall Rating Write a Review

  1. 5 of 5

    hyndman0

    Purchased this light to ride the Tour Aotearoa 3000km Brevet from North Cape to Bluff. Used in the early morning starts and a few times in the late evening. Used mostly on shingle roads and sometimes on a single track in the bush. 1000 L is enough illumination in the bush and I used the low setting on the shingle roads. Light shines in an elliptical pattern giving ample width and height to the track ahead of you. Found the twist operation to turn the unit on and off and select the various modes, excellent. Easily controlled with gloves on. Haven’t changed the modes with the APP yet as I found the modes already loaded, suitable for what I wanted to do. Had to charge my 2500mAh phone a few times and it takes place faster than my wall charger. Will charge the phone twice before needing to be topped up. Mount is secure and soaks up vibration if you use the rubber grommet underneath and allows the beam adjustment +-15 Degrees up down, left and right. Putting the light in the mount is a little tricky and requires exact aligning the light with the bracket but once engaged is securely held. I am very pleased with the unit as a light and as an emergency battery charger. The 750L unit would have been suitable for the Brevet as it weighs quite a bit less and is smaller, but the bigger unit outshone all the lights I saw except for a hub operated light. Very pleased with my purchase.

Write a Review